Same Day
800-626-6622 | 215-529-1560

T62 Recon™ Test Set

by Platinum Tools®
The RECON is the first true 21st century telecommunication line analyzer setting a new standard for POTS butt sets. Read More
SKU: T62
Availability: In stock

The RECON is the first true 21st century telecommunication line analyzer setting a new standard for POTS butt sets. It is a field instrument that delivers more information of online conditions & status than any other test set on the market, anywhere in the world!!

Large backlit display for low light environments
Glow-in-the-dark keypad
Advanced data detection & identification
100% Data Safe
Rugged weatherproof case, IP54 Standard
Drop Proof (Tested at 20ft)


  • 60-in cord set with Alligator Clips, Angled Bed-of-Nails, Piercing Point and No-Fault RJ12 8P8C connector
  • Speaker with fine volume adjustment
  • Noise cancelling microphone
  • Microphone mute with toggle on/off locking feature
  • Soft key menu system
  • Metal spring-loaded belt clip
  • Cushion boot for extra protection
  • Off-hook current and polarity
  • On-hook voltage and polarity
  • On-hook and call waiting Caller ID info
  • Amplified Line Monitor for volume levels comparable to
  • 8 number Stored memory with Alpha/Numeric tags
  • Fuel Gauge Battery condition
  • Continuous Polarity Indication
  • Caller ID/Call Waiting and Caller ID error detection
  • Tone and Pulse dialing
  • Configurable Auto Off in all modes
  • Detects and identifies DSL and T1 lines
  • Last number dialed, redialed or received
  • Multilingual (English, French, Spanish)
  • Backlight 0-100% adjustable with on/off option
Products specifications
Apparent Line Resistance275 Ohms at 20 mA
BatteryWith 100% backlight and in speaker mode - 20 hours
Dimensions8.25" x 2.5" x 2"
DisplayTransflective 128 by 64 pixel graphical liquid crystal display (LCD) with LED backlight
Features32 digits with 12 character tag, Backlight off and speaker off - 75 hours, Current: 10 to 110 mA ±5%, Interdigit interval: 820 ms, Last number redial plus list of last 10 numbers dialed, Make/break ratio: 60% to 40% ±2%, Resistance during break: 120K Ohms minimum, Standby - 2 years, Stored in non-volatile memory, Tone Level: High group: -6 ±2 dBm; Low group: -8 ±2 dBm
Flash Duration600 ± 50 ms
InterfaceAttached cord set, 60°
LanguagesEnglish, Spanish and French
Line-Current Range10 to 110 mA
MeasurementVoltage: 0 to 200 VDC ±5%
Memory8 programmable locations
Monitor Mode ImpedanceDC: 1MΩ typical – AC: 390 KΩ at 1 KHz typica
Pause DurationTone: 3 seconds; Pulse: 3.4 seconds
Pulse DialingPulse rate: 10 pps ± 10%
Return LossMinimum 14dB at 600 Ohms
Ringer EquivalenceIn BELL mode: 0.0 (No ringer load)
Tone DialingDTMF output (into 600 Ohms): Tone-frequency error: ±1.5%
Weight (Lbs)1.59
AvailabilityIn stock
0 / 5 (based on 0 reviews) Be the first to review this product