| Item Number: |
ETS-EB62-10BASET-MBNC-45-3C |
| Product Name: |
Monoline Coax Balun - Male BNC to 3" UTP R45 Plug 10BaseT - 100 Ohm |
| Manufacturer: |
Energy Transformation Systems, Inc. |
| Price:
|
$31.50
|
Monoline Coax Balun - Male BNC to 3" UTP R45 Plug 10BaseT - 100 Ohm from ComputerCableStore™. The unique Monoline Baluns, only from ETS, allow you to reuse existing premise cabling for Ethernet 10BaseT networks. One run of Coax replaces two pair of UTP with improved NEXT (near end crosstalk) over the 802.3 specification. The Monoline Balun at each hub port, and one at the workstation completes the installation, without the expense of rewiring your facility with UTP for data. Coax has better high frequency characteristics than UTP, allowing run lengths of up to 200 meters. Many configurations are available to meet your connectivity requirements. Many standard applications will utilize a female BNC and an RJ45 plug. Features/AdvantagesThe 8 Position 8 Contact (8P8C) (often called RJ45) plugs and sockets are most regularly used as an ethernet connector. 8P8C connectors are typically used to terminate twisted pair cable. The BNC (Bayonet Neill Concelman) connector is a very common type of RF connector used for terminating coaxial cable. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. BNC connectors were commonly used on 10base2 thin Ethernet networks, both on cable interconnections and network cards, though these have largely been replaced by newer Ethernet devices whose wiring does not use coaxial cable. Some ARCNET networks use BNC-terminated coax.
- May use pre-existing Star Cabling instead of 2 pair UTP cable
- Exceeds 802.3 10BaseT NEXT specification, isolating the reciever from the transmitted signal
- Run over 200 meters on coax (Exceeds TIA568A)
- Impedance matched
- Compact plastic case
- Made in USA. 100% QA. Specifications
- Insertion Loss < 0.5dB
- Connectors BNC (male or female) to RJ45 (plug or jack)
- Impedance 50/75/93 O to dual 100 O (two pair)
- Crosstalk > 30 dB
- Insertion Loss < 0.5 dB
- Connectors BNC (male or female) to RJ45 (plug or jack)
- Impedance 50/75/93 O to dual 100O (two pair)
- Crosstalk > 30 dB
- Dimensions 46mm x 25mm x 19mm - plug pigtails and cords as noted
|