Custom SolutionsFast Shipping

Manufacturers > Energy Transformation Systems, Inc. > Ethernet Baluns & Panels > Monoline Coax Ethernet 10BaseT Baluns

Monoline Coax Balun - Male BNC to RJ45 jack 10BaseT - 50 Ohm

Monoline Coax Balun - Male BNC to RJ45 jack 10BaseT - 50 Ohm - ETS-EB58-10BASET-MBNC-45


Item Number: ETS-EB58-10BASET-MBNC-45
Product Name:   Monoline Coax Balun - Male BNC to RJ45 jack 10BaseT - 50 Ohm
Manufacturer: Energy Transformation Systems, Inc.
Price: $31.50



Monoline Coax Balun - Male BNC to RJ45 jack 10BaseT - 50 Ohm from ComputerCableStore™. The unique Monoline Baluns, only from ETS, allow you to reuse existing premise cabling for Ethernet 10BaseT networks. One run of Coax replaces two pair of UTP with improved NEXT (near end crosstalk) over the 802.3 specification.

The Monoline Balun at each hub port, and one at the workstation completes the installation, without the expense of rewiring your facility with UTP for data. Coax has better high frequency characteristics than UTP, allowing run lengths of up to 200 meters.

Many configurations are available to meet your connectivity requirements. Many standard applications will utilize a female BNC and an RJ45 plug.

Features/Advantages
The 8 Position 8 Contact (8P8C) (often called RJ45) plugs and sockets are most regularly used as an ethernet connector. 8P8C connectors are typically used to terminate twisted pair cable.
The BNC (Bayonet Neill Concelman) connector is a very common type of RF connector used for terminating coaxial cable. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. BNC connectors were commonly used on 10base2 thin Ethernet networks, both on cable interconnections and network cards, though these have largely been replaced by newer Ethernet devices whose wiring does not use coaxial cable. Some ARCNET networks use BNC-terminated coax.
  • May use pre-existing Star Cabling instead of 2 pair UTP cable
  • Exceeds 802.3 10BaseT NEXT specification, isolating the reciever from the transmitted signal
  • Run over 200 meters on coax (Exceeds TIA568A)
  • Impedance matched
  • Compact plastic case
  • Made in USA. 100% QA. Specifications
  • Insertion Loss < 0.5dB
  • Connectors BNC (male or female) to RJ45 (plug or jack)
  • Impedance 50/75/93 O to dual 100 O (two pair)
  • Crosstalk > 30 dB
  • Insertion Loss < 0.5 dB
  • Connectors BNC (male or female) to RJ45 (plug or jack)
  • Impedance 50/75/93 O to dual 100O (two pair)
  • Crosstalk > 30 dB
  • Dimensions 46mm x 25mm x 19mm - plug pigtails and cords as noted

 


 Customer Reviews - Avg Rating: n/a - Satisfaction Index: n/a
Date Added: n/a
StarStarStarStarStar
Be the first to rate this item.
Rate This Product
 
Order Options:
Price: $31.50
Qty:
Add To Cart
Add to Wishlist
Email a Friend
Shipping Rate
Print
8-R1723-003
3 FT RG59/U BNC Patch Cable - M/M
3 FT RG59/U BNC Patch Cable - M/M
ComputerCableStore™ quality 3 FT RG59/U BNC Patch Cable - M/M Cables are excellent for video applications such as CCTV, home theater, and much more.
A patch cable or patch cord (sometimes patchcable or patchcord) is an electrical or optical cable, used to connect ("patch-in") one electronic or optical device to another for signal routing. Devices of different types (ie: a switch connected to a computer, or switch to router) are connected with patch cords. Patch cords are usually produced in many different colours so as to be easily distinguishable, and are relatively short, perhaps no longer than two metres. Types of patch cords include microphone cables, headphone extension cables, XLR connector, RCA connector and 1/4" TRS connector cables (as well as modular ethernet cables), and thicker, hose-like cords (snake cable) used to carry video or amplified signals. However, patch cords typically only refer to those short ones used with patch panels.
The BNC (Bayonet Neill Concelman) connector is a very common type of RF connector used for terminating coaxial cable. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. BNC connectors were commonly used on 10base2 thin Ethernet networks, both on cable interconnections and network cards, though these have largely been replaced by newer Ethernet devices whose wiring does not use coaxial cable. Some ARCNET networks use BNC-terminated coax.
Price: $1.95
8-7900BK-025
25 FT Cat5e Network Patch Cable - Black
25 FT Cat5e Network Patch Cable - Black
This 350 MHz Enhanced 25 FT CAT5e Network Patch Cable - Black is made with Cat5e cable, which consists of 4 unshielded twisted pairs, 24 AWG. stranded cond. and a PVC jacket. The RJ45 plugs we use are made to the Cat5e specs. and have 50 microns of gold plating per contact.
Cat 5 e cable is an enhanced version of Cat 5 that adds specifications for far end crosstalk. It was formally defined in 2001 as the TIA/EIA-568-B standard, which no longer recognizes the original Cat 5 specification. Although 1000BASE-T was designed for use with Cat 5 cable, the tighter specifications associated with Cat 5e cable and connectors make it an excellent choice for use with 1000BASE-T.
The 8 Position 8 Contact (8P8C) (often called RJ45) plugs and sockets are most regularly used as an ethernet connector. 8P8C connectors are typically used to terminate twisted pair cable.
A patch cable or patch cord (sometimes patchcable or patchcord) is an electrical or optical cable, used to connect ("patch-in") one electronic or optical device to another for signal routing. Devices of different types (ie: a switch connected to a computer, or switch to router) are connected with patch cords. Patch cords are usually produced in many different colours so as to be easily distinguishable, and are relatively short, perhaps no longer than two metres. Types of patch cords include microphone cables, headphone extension cables, XLR connector, RCA connector and 1/4" TRS connector cables (as well as modular ethernet cables), and thicker, hose-like cords (snake cable) used to carry video or amplified signals. However, patch cords typically only refer to those short ones used with patch panels.
Price: $4.29

Close [X]
Home Contacts Your Account Wish List Sign In

Copyright © 2010 ComputerCableStore™ 800.626.6622 Monoline Coax Balun - Male BNC to RJ45 jack 10BaseT - 50 Ohm

CableCash® Details