Custom SolutionsFast Shipping

ICC

IC110RMCMB
Patch Panel 110 Cable Management 1 Rms Patch Panel 110 Cable Management 1 Rms

110 cable management panel, 1 rack mount space. Ideal for use on racks for cable management in conjunction with 110-rack mounted patch panels. includes #12 screws. Rack mounted reinforced steel panel with two 110 cable management blocks. Designed with rear cable entry for flexibility. Designed to fit all standard 19" racks and cabinets.

More Info
IC107BNCBK
Module BNC 75 Ohm Nickel Plated - Black Module BNC 75 Ohm Nickel Plated - Black

Designed for CCTV, Serial Digital and NTSC Analog video signals, Satellite Up/Down Link signals, as well as any application requiring 75 Ohm BNC connectors.
Nickel plating for improved performance with superior signal quality with minimal noiseGold plated contact for optimal signal outputDesigned for CCTV, serial digital and NTSC analog/digital video signals, satellite up/downlink signals, and moreProvides a clean and neat appearance installationCompatible with all IC107 faceplates, inserts, surface mount boxes, and blank patch panelsCompatible with all IC108 furniture faceplates, bezels, and surface mount boxesHousing color available in almond, black, ivory, and white
The BNC (Bayonet Neill Concelman) connector is a very common type of RF connector used for terminating coaxial cable. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. BNC connectors were commonly used on 10base2 thin Ethernet networks, both on cable interconnections and network cards, though these have largely been replaced by newer Ethernet devices whose wiring does not use coaxial cable. Some ARCNET networks use BNC-terminated coax.


More Info
IC107B8GIV
Keystone Jack - RCA White Insert - IDC - Ivory Keystone Jack - RCA White Insert - IDC - Ivory

These high performance connectors provide a clean connection point for wired electronics to wall outlets allowing cables to be hidden within the walls or cabinetry. They provide for superior signal quality with minimal noise for component or Composite Video and audio systems. The RCA modular connectors come in various termination styles, RCA to coaxial F-connector, RCA to RCA, RCA to IDC (over UTP cable) and RCA to RG6/59 cable via a compression connector. They are available with six insulator colors red, green, blue, black, white, and yellow and come in four body colors almond, black, ivory, and white allowing maximum customization options. They are fully compatible with all ICC's modular faceplates and multi-media panels.
Composite video is the format of an analog television (picture only) signal before it is combined with a sound signal and modulated onto an RF carrier. Composite video is often designated by the CVBS acronym, meaning any of "Color, Video, Blank and Sync", "Composite Video Baseband Signal", "Composite Video Burst Signal", or "Composite Video with Burst and Sync". It is usually in a standard format such as NTSC, PAL, or SECAM. It is a composite of three source signals called Y, U and V (together referred to as YUV) with sync pulses. Y represents the brightness or luminance of the picture and includes synchronizing pulses, so that by itself it could be displayed as a monochrome picture. U and V represent hue and saturation or chrominance, between them they carry the color information. They are first mixed with two orthogonal phases of a color carrier signal to form a signal called the chrominance. Y and UV are then combined. Since Y is a baseband signal and UV has been mixed with a carrier, this addition is equivalent to frequency-division multiplexing.
An RCA jack, also referred to as a phono connector or Cinch connector, is a type of electrical connector that is commonly used in the audio/video market. The name "RCA" derives from the Radio Corporation of America, which introduced the design by the early 1940s to allow mono phonograph players to be connected to amplifiers.


More Info
ICFOA9SM02
Sc-st Fiber Optic Adapter Duplex Ceramic Sc-st Fiber Optic Adapter Duplex Ceramic

Sc-st duplex adapters allow customization of adapter panels and fiber optic patch panels and adapts from sc to st configurations.

More Info
IC107DFDAL
Faceplate Decorex 2-gang Almond Faceplate Decorex 2-gang Almond

Decorex faceplates accept modular or integrated Decorex inserts and are made from rugged durable plastic with a smooth glossy finish. They provide a great platform for installing any home theater systems and are capable of holding all audio and video connectors.

More Info

CableCash® Details