S-Video Jack + 2-RCA (Stereo Audio) Jack to RJ45 Jack from ComputerCableStore™. The ETS PV902 S-Video/Stereo Audio Balun adapts Category 5 or better premise wiring for use with Super VHS, Hi-8 and other "Y/C" format, high quality video signals. The PV902 uses the industry standard 4 pin mini-DIN connector for video, and RCA jacks for the two audio channels. This arrangement complements the connectors on most high-end consumer and Y/C format professional video devices. The PV902 is a passive (non-powered) device. It is bidirectional, in the sense that identical baluns are used on transmit and receive ends of the run of UTP. Used in pairs to adapt both ends of a run of Category 5 or better cable, the result is clean, transparent video and audio transmitted over distances in excess of 300 meters. Features/AdvantagesThe 8 Position 8 Contact (8P8C) (often called RJ45) plugs and sockets are most regularly used as an ethernet connector. 8P8C connectors are typically used to terminate twisted pair cable. An RCA jack, also referred to as a phono connector or Cinch connector, is a type of electrical connector that is commonly used in the audio/video market. The name "RCA" derives from the Radio Corporation of America, which introduced the design by the early 1940s to allow mono phonograph players to be connected to amplifiers.
- S-Video (Y/C baseband) channel and 2 audio channels on one run of UTP
- Use for point to point replacement of coax and shielded cables
- Rugged plastic cases
- Made in USA. 100% QA. Applications
- Home Theater
- High Resolution Remote Monitors
- "Prosumer" Video Equipment
- Video Projection Systems Specifications
- Bandwith Flat to 60 MHz (video) / 10Hz to 20kHz (audio)
- Connectors 4 pin minidin (video) / (2) RCA (audio) to RJ45
- Crosstalk >50dB (video)
- Impedance 600:600 (audio)
- Isolation 500 V (audio, per channel)
- Dimensions 66 mm x 66 mm x 28 mm
|