RGB Coax/BNC Jumpers (Set of 3) - Color Coded from ComputerCableStore™. The ETS PV890 Series of RGB Video Baluns provides you with the ability to send RGB video over standard Telecom wiring (UTP), of Category 3 or better quality. The PV890 supports RGB with SOG (sync on green), using 3 pairs of UTP. The PV891 allows RGB with separate sync to be run using 4 pairs. Both baluns support monitors with resolutions up to 1024 x 768 pixels, at refresh rates up to 75 Hz. The RGB Baluns allow the user or installer to take advantage of pre-installed Telecom wiring, or to realize the cost advantage of wiring with UTP instead of coax. Features and AdvantagesThe RGB color model is an additive color model in which red, green, and blue light are added together in various ways to reproduce a broad array of colors. The name of the model comes from the initials of the three additive primary colors, red, green, and blue. The main purpose of the RGB color model is for the sensing, representation, and display of images in electronic systems, such as televisions and computers, though it has also been used in conventional photography. Before the electronic age, the RGB color model already had a solid theory behind it, based in human perception of colors.
- SOG and seperate sync models available
- Send RGB over UTP at distances of up to 600 meters (150 meters nominal using CAT3 cable)
- Supports up to 1024 x 768 resolution at 75 Hz refresh
- Meets FCC Class A
- Superior signal balancing lower crosstalk, less ingree and ghosting
- May utilize existing telecom wiring
- Sturdy compact plastic case
- Made in USA. 100% QA. Specifications
- Bandwith Flat to 60 Mhz, each channel
- Connectors 3 or 4 BNC female to RJ45 Jack
- Distance 100 meters (TIA 568) minimum
- Emissions Meets FCC Class A
- Common Mode 50 dB
- Media Category3 or better - Category 5 or better recommended
- Dimensions 66mm x 66mm x 28mm
Spec Sheet 1 (ETS-RGBJ3)
|