| Item Number: |
ETS-EBS-10BASET-11-3-3C |
| Product Name: |
Monoline Single Pair Balun - RJ11 3 cord pins 3 4 to RJ45 jack 10BaseT |
| Manufacturer: |
Energy Transformation Systems, Inc. |
| Price:
|
$31.50
|
Monoline Single Pair Balun - RJ11 3 cord pins 3 4 to RJ45 jack 10BaseT from ComputerCableStoreā¢. The unique Monoline Baluns, only from ETS, allow you to reuse existing premise cabling the Ethernet 10BaseT networks. One single pair of UTP or STP replaces two pair UTP with improved NEXT (near end crosstalk) over the 802.3 specification. A Monoline Balun at each hub port, and one at the workstation complete the installation, without the expense of rewiring your facility with UTP for data. Standard 802.3 distances (100 meters) are supported over a single pair of UTP or STP. The Cable Doubler (EBD-10BaseT-1C) allows you to support two 10BaseT connections with a single UTP network run, simply and easily. Features/AdvantagesThe 8 Position 8 Contact (8P8C) (often called RJ45) plugs and sockets are most regularly used as an ethernet connector. 8P8C connectors are typically used to terminate twisted pair cable. RJ11 is a physical interface often used for terminating telephone wires. It is probably the most familiar of the registered jacks, being used for single line POTS telephone jacks in most homes across the world.Cables sold as RJ11 are nearly always 6P4C (six position, four conductor), with four wires running to a central junction box. Two of its six possible contact positions connect tip and ring and the other two conductors are then unused. 6P2C and 6P6C can also be found in stores.
- May use installed base of telco/Cat3 or better UTP
- The Cable Doubler allows 1 existing run to a workstation to support two connections without rewiring.
- Exceeds 802.3 10BaseT NEXT specification, isolating the reciever from the transmitted signal
- Run 100 meters (TIA568A) on high quality telco, Cat3 or better UTP
- Compact plastic case
- Made in USA. 100% QA.
|