Monoline Keystone Jack - 2 Pos. 110 Block in Keystone RJ45 Module from ComputerCableStore™. Introducing Monoline Panels, Jacks & Dual Outlets from ETS. Using the Monoline technology available ONLY from ETS, you can use pairs of pre-installed telephone wire already in place to setup a 10BaseT network - without rewiring! At the wiring/distribution closet, place Monoline Panels, and your 10BaseT hub equipment. Terminate the unused telephone pairs onto standard punchdown blocks on the back on the Monoline Panel. Patch your hub into the Monoline Panel using standard data patch cables. Now available with F-connector for use with pre-existing coax runs. At each endpoint (room or suite), replace the existing phone jack with either our Monoline Dual Outlet, or add a Monoline Keystone Jack to an existing installation with either a wallmount box, or a new wall plate. Your phone service continues, and on the single remaining pair of twisted pair wiring, you have a complete 10BaseT connection. Features/AdvantagesA Keystone module is an industry standard type of wall jack used in residential and business environments. The system consists of a modular face plate to which jacks are mounted. They are generally used as a termination point for permanent cable installations. The 8 Position 8 Contact (8P8C) (often called RJ45) plugs and sockets are most regularly used as an ethernet connector. 8P8C connectors are typically used to terminate twisted pair cable.
- Utilize unused pairs of installed telecom wire to run Ethernet today
- Exceeds 802.3 10BaseT NEXT specification, isolating the reciever from the transmitted signal
- Rugged construction
- Made in USA. 100% QA. Specifications
- Insertion Loss < 0.5 dB
- Connectors 110 to RJ45 Jack (RJ11 for phone output) - EF has F conn., others are 110 punchdown.
- Impedance 100 O (single pair) to dual 100 O (two pair)
- Crosstalk > 30 dB
- Dimensions 23mm x 23 mm x 31 mm (Keystone Jack) - 125 mm x 80 mm x 36 mm (Dual Outlet) - 1 RU x 33 mm deep (Panels)
|