| Item Number: |
IC1078L6GY |
| Product Name: |
Cat 6 Modular Keystone Jack - RJ45 (8P8C) Ez - Gray |
| Manufacturer: |
ICC |
| Price:
|
$3.70
|
ICC's EZ Category 6 modular connector, RJ-45 keystone jack, is 8-position 8-conductor (8P8C) is engineered to provide superior performance and reliability, supporting Gigabit Ethernet applications and beyond. The advanced printed circuit board design is tuned to provide optimum signal quality with maximum headroom, allowing it to exceed TIA/EIA Category 6 performance standards. It offers superior signal quality and noise reduction due to its enhanced Near-End and Far-End Crosstalk cancellation and minimum return losses. The EZ connector's flat back IDC construction offers faster installation through its straight through in-line termination design and one piece snap-on termination cap. 1. CAT 6 Module:
A. Electrical:
Current rating: 1.5 amps
Insulation resistance: 500 mohms min.
Contact resistance: 20 mohms max.
DC resistance: 0.1 ohm max.
Transmission performance exceeds Category 6 connecting hardware requirements specified in TIA/EIA-568-B.2-1 when used with compatible horizontal cable
B. Mechanical:
Plug insertion life: 750 cycles min.
Plug and jack contact force: 100 grams min. using FCC approved plug
Plug retention force: 30 lbs min.
Temperature: -40o to 150o F (-40o to 68o C)
C. Physicals:
Housing: ABS, UL 94V-0
Jack wiring: 50 micro inches of gold over 100 inches of nickel
Connector: insulation displacement connector (IDC); accepts 23~24 AWG solid wire
D: Colors: XX: AL-Almond, BK-Black, BL, Blue, GN-Green, GY-Gray, IV-Ivory, OR-Orange, PR-Purple, RD-Red, WH-White, YL-Yellow
2. Termination cap:
A. Material: PC, UL 94V-0
B.Color: Clear
- CAT 6 rated connectors provide excellent performance for data networks requiring maximum speed and bandwidth
- PCB technology provides maximum performance and superior signal quality
- Enhanced crosstalk cancellation reduces return loss and improves performance by rejecting noise and unwanted signals
- Exceeds ANSI/TIA/EIA-568-B.2-1 Category 6 connecting hardware requirements
- Designed with in-line 110 IDC, in-sequence termination reducing termination time
- Terminate with 110 punch down tool ICACSPDT00
- One piece termination cap allows for a quick and easy termination
- Includes an integrated TIA-568A/B color wiring diagram
- Backwards compatible to all lower rated category components
- Compatible with all ICC configurable faceplates, inserts, surface mount boxes, and blank patch panels
- Compatible with all ICC furniture faceplates, Elite bezels, and Elite surface mount boxes
- Used with ICC Category 6 patch cords
- Available in almond, black, blue, gray, green, ivory, orange, purple, red, white, and yellow
- Installation instructions included
- UL listed
Spec Sheet 1 (IC1078L6GY)
|
Share This Page:
110 & 66 Single Blade Punch-down Tool110 & 66 Single Blade Punch-down Tool from ComputerCableStore™. This tool is designed for both 110 and 66 single-wire termination and can be easily switched between high and low impact settings.
Price: $32.71
7 FT Booted Cat5e Network Patch Cable - YellowThis Networx™ 350 MHz Enhanced Patch Cable is ideal for use in 10/100/1000 BASE-T Ethernet Networks. The connector contacts on this cable have 50 microns of gold plating for exceptional performance. A quality Cat5 enhanced ethernet network booted patch ca
Price: $1.35
Handheld Termination AidThe handheld termination aid reduces the effort required for terminations and helps to terminate all modular connectors and IC110-type patch plugs, including our new high density CAT 6, CAT 5e and voice 6P6C jacks.
Price: $1.62
|