Analog Audio Adapters - RCA to RJ45 pins 3 & 6 from ComputerCableStore™. The PA800 series of Analog Audio Adapters is ideal for use in applications requiring audio signals to be sent over distances great than 4 meters. Signals may be sent in either direction. By balancing the audio signal as well asl isolating, signals can be easily sent over 100 meters. New in this family of products is the ETS-PA807 Stereo Audio Adapter and the ETS-PA808 Dual Stereo Audio Adapter. In our standard middle size case, the ETS-PA807 or PA808 allow you to send two or 4 audio signals down a single run of UTP (utilizing 2 or 4 pairs), without having to use a hydra assembly. Additionally, the ETS-PA808 allows bi-directional stereo audio over a single UTP run. Features/AdvantagesThe 8 Position 8 Contact (8P8C) (often called RJ45) plugs and sockets are most regularly used as an ethernet connector. 8P8C connectors are typically used to terminate twisted pair cable. An RCA jack, also referred to as a phono connector or Cinch connector, is a type of electrical connector that is commonly used in the audio/video market. The name "RCA" derives from the Radio Corporation of America, which introduced the design by the early 1940s to allow mono phonograph players to be connected to amplifiers.
- Full audio bandwith
- Minimizes spurious signal ingress
- Eliminates ground loops
- Compact plastic case
- Made in USA. 100% QA. Specifications
- Bandwith 10 Hz to 20 kHz
- ConnectorsRCA Jack(s) to RJ45
- Impedance 600:600
- Isolation 500V
- Signal Level 1.0 V (nominal)
- Dimensions 46mm x 25 mm x 19 mm (PA800-803) - 66mm x 66mm x 28mm (PA807, PA808)
Spec Sheet 1 (ETS-PA802)
|