Active VGA Source End (Passive) from ComputerCableStore™. The ETS-PV938 Active VGA Set, Dual Output is based on solid foundation of our Passive VGA balun series. This first product in the Active VGA line from ETS allows signals to be sent from a computer over a single 4 pair UTP run at distances of over 100 meters. At the source end, a passive technology balun (PV938) with a 15pin HDD connector cable hooks to your computer. At the receiving end, the PV939-2 (powered via AC transformer) actively regenerates the RGBHV signals from the source, and splits to provide two outputs. Caution: This product does not work with most LCD and other flat panel displays. Features/AdvantagesThe term Video Graphics Array (VGA) refers specifically to the display hardware first introduced with the IBM PS/2 line of computers in 1987, but through its widespread adoption has also come to mean either an analog computer display standard, the 15-pin D-subminiature VGA connector or the 640×480 resolution itself. While this resolution has been superseded in the personal computer market, it is becoming a popular resolution on mobile devices.
- Transmit XGA signals on a single run of 4 pair UTP
- Active reciever regenerates signals, splits to provide (2) outputs at reciever end
- Passive send unit at computer
- Compact plastic cases
- Made in USA. 100% QA. Specifications
- Bandwith Flat to 60 MHz
- Connectors 15p HDD to RJ45 Red: HDD 1(6gnd) to 1 & 2 RJ45 Green: HDD 2 (7gnd) to 4 & 5 RJ45 Blue: HDD 3 (8gnd) to 7 & 8 RJ45 H & V sync: HDD 13, 14 to 3 & 6 RJ45
- Power: 9 VDC, 500mA, (+) center (for ETS-PV939-2)
- Demensions 140mm x 85mm x 40mm (ETS-PV939-2) - 66mm x 66mm x 28mm (ETS-PV939-2)
Spec Sheet 1 (ETS-PV938)
|