The 4x4 Matrix for
HDMI 1.3 routes high definition at resolutions up to
1080p with multichannel digital audio from any four HDMI sources to any four displays. The 4x4 Matrix eliminates the need to disconnect and reconnect HDMI sources. It works with any HDMI source that connects to an HDMI display, supporting advanced digital audio formats such as Dolby TrueHD and DTS HD Master Audio. Each source is accessible at all times by any display by selecting it with an IR remote, or using the RS232 port to switch the unit. Connect any four HD sources to the Matrix's HDMI inputs. Then connect four displays to the Matrix's HDMI outputs. Once the sources, the Matrix and the displays are powered and connected, select which sources to view on any of the displays by using the IR remote or RS232 connectivity.
HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transmitting uncompressed digital data. It represents a digital alternative to consumer analog standards such as Radio Frequency (RF) coaxial cable, composite video, S-Video, SCART, component video, D-Terminal, and VGA. HDMI connects digital audio/video sources such as set-top boxes, Blu-ray Disc players, personal computers (PCs), video game consoles, and AV receivers to compatible digital audio devices, computer monitors, and digital televisions. HDMI supports, on a single cable, any TV or PC video format, including standard, enhanced, and high-definition video, up to 8 channels of digital audio, and the Consumer Electronics Control signal. It is independent of the various digital television standards such as ATSC and DVB as these are encapsulations of compressed MPEG video streams (which can be decoded and output as an uncompressed video stream on HDMI). A Digital Visual Interface (DVI) signal is electrically compatible with an HDMI video signal; no signal conversion needs to take place when an adapter is used, and consequently no loss in video quality occurs.
1080p is the shorthand name for a category of HDTV video modes. The number "1080" represents 1,080 lines of vertical resolution (1080 horizontal scan lines), while the letter p stands for progressive scan (meaning the image is not interlaced). 1080p can be referred to as full HD or full high definition to differentiate it from other HDTV video modes. The term usually assumes a widescreen aspect ratio of 16:9, implying a horizontal resolution of 1920 pixels. This creates a frame resolution of 1920×1080, or 2,073,600 pixels in total. The frame rate in hertz can be either implied by the context or specified after the letter p (or i), such as 1080p30, meaning 30 Hz.
- Effortlessly switches any four HDMI 1.3 sources to any four HDMI output displays
- Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p, 2k, and computer resolutions up to 1920 x 1200 are easily achieved
- Discrete IR remote (included)
- Serial RS-232 remote port
- Rack ears included
- HDMI and HDCP compliant
- Video Amplifier Bandwidth: 225 MHz
- Input Video Signal: 1.2 volts p-p
- Input DDC Signal: 5 volts p-p (TTL)
- Single Link Range: 1080p/1920 x 1200
- HDMI Connector: type A 19 pin female
- Remote Control Port: RS232 female, mini-stereo
- Power Supply: 5V DC
- Power Consumption: 30W
- Dimensions: 17.1"W x 1.8"H x 6.8"D