These
CAT5e Patch Cables are Custom Built Production Overrun. We have limited stock and they are NON-RETURNABLE. Drastically Reduced Price. This CAT5e
Patch Cable is made from Mohawk CAT5e Cable, is Terminated using high quality Panduit Snag less Connectors, and has a blue Amp Boot. Category 5 Enhanced high speed cabling is a pre-requisite for today's performance demanding Ethernet and gigabit networks. The ComputerCableStore™ will keep you at the head of the pack with our high performance 350Mhz Cat5E patch cables. ComputerCableStore™ Enhanced Cat5e 350Mhz patch cables easily handle bandwidth intensive applications and more. Our UL certified patch cables meet all the TIA/EIA standards. ComputerCableStore™ Enhanced Cat5 patch cables are well constructed using Enhanced Cat5e bulk cable, which consists of 4 unshielded twisted pairs, 24 AWG. stranded conductors, and a PVC jacket. We terminate the non-booted Enhanced Cat5e cables with
RJ45 plugs, which are staggered and are plated with 50 microns of gold plating per contact. We terminate the snag less molded booted Enhanced Cat5e cables with short body RJ45 plugs, which are plated with 50 microns of gold plating per contact. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. Our molded, snag less boot prevents unwanted cable snags during installation/maintenance and provides extra strain-relief.
Cat 5 e cable is an enhanced version of Cat 5 that adds specifications for far end crosstalk. It was formally defined in 2001 as the TIA/EIA-568-B standard, which no longer recognizes the original Cat 5 specification. Although 1000BASE-T was designed for use with Cat 6 cable, the tighter specifications associated with Cat 5e cable and connectors make it an excellent choice for use with 1000BASE-T ethernet networks.
The 8 Position 8 Contact (8P8C) (often called RJ45) plugs and sockets are most regularly used as an ethernet connector. 8P8C connectors are typically used to terminate twisted pair cable.
A patch cable or patch cord (sometimes patchcable or patchcord) is an electrical or optical cable, used to connect ("patch-in") one electronic or optical device to another for signal routing. Devices of different types (ie: a switch connected to a computer, or switch to router) are connected with patch cords. Patch cords are usually produced in many different colours so as to be easily distinguishable, and are relatively short, perhaps no longer than two metres. Types of patch cords include microphone cables, headphone extension cables, XLR connector, RCA connector and 1/4" TRS connector cables (as well as modular ethernet cables), and thicker, hose-like cords (snake cable) used to carry video or amplified signals. However, patch cords typically only refer to those short ones used with patch panels.
- Conductor: 4-pair 24 AWG Stranded Copper
- Connector: 50-micron gold plated RJ-45 Male to Male
- Jacket: PVC
- Applications:
- 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
- 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN
- 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM
- Voice
- Designed For: Network Interface Cards, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and all other twisted-pair applications
- Wired: TSB 568B (Standard US)
- Certifications: TIA/EIA; UL Listed