ComputerCableStore.com's DX-Series 1000FT Indoor/Outdoor PVC 12 Fiber Cable from Optical Cable Corporation is used in trunking, LAN, and distribution applications where small size, lightweight, and versatile installation capability are required. Suitable for both indoor and outdoor use - no need to splice outdoor cable to indoor cable at the building entrance. Flame-retardant for indoor installations. Fungus-resistant, water-resistant, and UV-resistant for outdoor use. Cable can be armored for additional protection in direct burial and aerial installations. Highest specific strength-to-weight ratio and compact cable design for limited conduit space and tight bends in long cable pulls. Helically stranded cable core for flexibility, survival in difficult pulls, and mechanical protection for the optical fibers. Lower total installed costs. Economical for longer distance runs where size and cable cost are more significant High performance tight-buffered coating on each optical fiber for environmental and mechanical protection. 2 to 144 fibers without subgrouping for the most size efficient tight-buffered fiber optic cable available; higher fiber counts are available upon request Water-blocked D-Series and DX-Series Distribution Cables are available. All bulk fiber cable comes in an OptiReel.

OptiReel is a self-contained payout box to facilitate storage, handling and pulling of the cables. The packaging greatly reduces set-up time for each pull. Therefore, the box is ideally suited for cable pulls through building duct systems, walls and ceilings where multiple cables may be pulled together and many relatively short runs need to be installed. OptiReel cable boxes can be easily stacked and staged together with other types of data cables for faster installations. The compact boxes contain an internal reel so that cable stands do not have to be used. Cables in the boxes are marked with decreasing length markings, so that the installer always knows the length of the remaining cable in the box. OptiReel cable packaging is available for Optical Cable Corporation’s simplex and duplex AX-Series and DX-Series types of cables, either riser-rated or plenum-rated, with 62.5/125, 50/125, and single-mode fibers.

• DX-Series Meets the Following Standards:
  • ANSI X3T9.5 PMD
  • ATM 155 Mb/s
  • Fibre Channel FC-PH
  • GR-409-CORE
  • ICEA-S-104-696
  • ICEA-S-83-596
  • ICEA-S-87-640
  • TIA-568
  • TIA-598-B
  • TIA-758 (water-blocked cables)
• Specifications:
  • Fiber Count: 12
  • Under Installation Tensile Load: 15X outside diamete
  • Under Long-Term Tensile Load: 10X outside diameter
  • Operating Temperature: -40°C to +85°C
  • Storage Temperature: -55°C to +85°C
  • Crush Resistance: 1,800 N/cm
  • Impact Resistance: 1,500 impacts
  • Flex Resistance: 2,000 cycles

 

Date Added: n/a Be the first to rate this product.